Polyimide Surface Dielectric Barrier Discharge for Inactivation of SARS-CoV-2 Trapped in a Polypropylene Melt-Blown Filter

Surface dielectric barrier discharge (SDBD) was used to inactivate the infectious severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) trapped in a polypropylene (PP) melt-blown filter. We used a dielectric barrier made of polyimide films with hexagonal holes through which air flowed. In a cylindrical wind tunnel, the SDBD device supplied reactive oxygen species such as ozone to the SARS-CoV-2 trapped in the PP filter. A plaque assay showed that SDBD at an ozone concentration of approximately 51.6 ppm and exposure time of 30 min induced more than 99.78% reduction for filter-adhered SARS-CoV-2. A carbon catalyst after SDBD effectively reduced ozone exhaust below 0.05 ppm. The combination of SDBD, PP filter, and catalyst could be a promising way to decrease the risk of secondary infection due to indoor air purifiers.

Instant inactivation of aerosolized SARS-CoV-2 by dielectric filter discharge.

This study aimed to evaluate the instant inactivation effect of dielectric filter discharge (DFD) on severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) aerosols. The filter consisted of one layer of ZrO2 beads covered by aluminum mesh electrodes; this porous structure of DFD part generates filter-type surface discharge and reactive oxygen species. In a closed cylindrical chamber, DFD treated air flow containing SARS-CoV-2 aerosols, primarily composed of particle diameters of ≤ 1 µm. A polypropylene melt-blown filter collected the treated bioaerosols for inactivation analysis. Plaque and polymerase chain reaction assays showed that the aerosolized SARS-CoV-2 that passed through the filter were more than 99.84% inactivated with degradation of SARS-CoV-2 genes (ORF1ab and E). However, ozone exposure without DFD passage was not found to be effective for bioaerosol inactivation in plaque assay.

Low molecular weight chitooligosaccharide inhibits infection of SARS-CoV-2 in vitro.

AIMS: The discovery of antiviral substances to respond to COVID-19 is a global issue, including the field of drug development based on natural materials. Here, we showed that chitosan-based substances have natural antiviral properties against SARS-CoV-2 in vitro. METHODS AND RESULTS: The molecular weight of chitosan-based substances was measured by the gel permeation chromatography analysis. In MTT assay, the chitosan-based substances have low cytotoxicity to Vero cells. The antiviral effect of these substances was confirmed by quantitative viral RNA targeting the RdRp and E genes and plaque assay. Among the substances tested, low molecular weight chitooligosaccharide decreased the fluorescence intensity of SARS-CoV-2 nucleocapsid protein of the virus-infected cells in a dose-dependent manner. CONCLUSIONS: In conclusion, the chitooligosaccharide, a candidate for natural treatment, has antiviral effects against the SARS-CoV-2 virus in vitro. SIGNIFICANCE AND IMPACT OF STUDY: In this study, it was suggested for the first time that chitosan-based substances such as chitooligosaccharide can have an antiviral effect on SARS-CoV-2 in vitro.

Sustainable Antibacterial and Antiviral High-Performance Copper-Coated Filter Produced via Ion Beam Treatment.

With the spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), disease prevention has become incredibly important. Consequently, mask and air-purifier use has increased. The filter is the core component of these items. However, most filter materials lack antimicrobial properties. Copper is a sustainable antimicrobial material. When copper is deposited onto the filter's surface, the microorganisms that come into contact with it can be effectively inactivated. In this study, we used an oxygen ion beam with a controlled process temperature to treat filter surfaces with copper. This enabled a strong adhesion of at least 4 N/cm between the copper and the filter fibers without damaging them. Upon exposing the filter to bacteria (Staphylococcus aureus ATCC 6538, Klebsiella pneumoniae ATCC 4352, Escherichia coli ATCC 25922, and Pseudomonas aeruginosa ATCC 27853) for one hour, a >99.99% removal rate was attained; when the filter was exposed to SARS-CoV-2 virus for one hour, it inactivated more than 99%. These beneficial properties minimize the risk of secondary infections, which are significantly more likely to occur when a conventional filter is replaced or removed.

Copper-Coated Polypropylene Filter Face Mask with SARS-CoV-2 Antiviral Ability.

Face masks will be used to prevent pandemic recurrence and outbreaks of mutant SARS-CoV-2 strains until mass immunity is confirmed. The polypropylene (PP) filter is a representative disposable mask material that traps virus-containing bioaerosols, preventing secondary transmission. In this study, a copper thin film (20 nm) was deposited via vacuum coating on a spunbond PP filter surrounding a KF94 face mask to provide additional protection and lower the risk of secondary transmission. Film adhesion was improved using oxygen ion beam pretreatment, resulting in cuprous oxide formation on the PP fiber without structural deformation. The copper-coated mask exhibited filtration efficiencies of 95.1 ± 1.32% and 91.6 ± 0.83% for NaCl and paraffin oil particles, respectively. SARS-CoV-2 inactivation was evaluated by transferring virus-containing media onto the copper-coated PP filters and subsequently adding Vero cells. Infection was verified using real-time polymerase chain reaction and immunochemical staining. Vero cells added after contact with the copper-coated mask did not express the RNA-dependent RNA polymerase and envelope genes of SARS-CoV-2. The SARS-CoV-2 nucleocapsid immunofluorescence results indicated a reduction in the amount of virus of more than 75%. Therefore, copper-coated antiviral PP filters could be key materials in personal protective equipment, as well as in air-conditioning systems.